We manufacture and supply high quality polyethylene tarpaulin sheets which are customized depending upon the requirements of individual customers. 3 ply and 5 ply tarpaulin solutions for waterproofing and sheltering trucks, wagons, ships, green houses, open storage materials and buildings.
We provide the tarpaulin product as per the customer demand and the specifications which may vary from customer to customer. We provide 3 ply and 5 ply Tarpaulin.
For Sheltering : Trucks/Wagons, Ships, Buildings, Open Storage Material, Green Houses.
For Covering : Lumber Cover : We can provide in all specifications.
| Gsm | : From 130 – 350 to 350 – 500 |
|---|---|
| Mesh | From 8 X 8 TO 13 X 13 |
| Denier | From 700 UPTO 1200 |
| Width | From 6ft AND ABOVE |
| Length | FROM 6 ft AND ABOVE |
| Lamination | LDPE Lamination on Both Side |
| Color | Blue, Yellow, Black, Silver/Blue, Silver/White, Silver/Black or as per Customer requirement. |
| Eyelet | Rust proof Eyelets on all Sides and Corners (as per requirement) |
| UV | As Per Requirement |
| Rope | Inserted in Borders of Tarpaulin |
We have the infrastructure to manufacture wide range of tarpaulins in various GSM, Size and colours. These Waterproof Tarpaulin is manufactured with pure raw materials with UV stabilizer for longer life, under constant exposure to sunlight. These tarpaulins are available in various sizes and dimensions and can be customized to suit the requirements of the clients
Tarpaulin is widely used in Rain Water Protection in Sheds, Transportation, Trucks & Other auto mobiles, Storage godowns, Boats, Snowmobiles, Plant & Machinery, Construction sites, Lumber, Grain, Temporary Storages, Tents, Ground Sheets, and more.
| Width and length : | |
|---|---|
| Size / sheet | 4.00 m x 6.00 m +- 1 |
| Size / roll | 4.00 m x 60.00 m +- 1 |
| Weight : | |
| Specific sheet without bands weight | 190 +- 20g under ISO 3801 (equivalent to 170 gsm min to 210 gsm max) |
| Complete sheet with bands weight | Plain sheet specific weight plus 10% additional weight for reinforcement bands under ISO 3801 |
| Total weight | From 187 gsm min to 231 gsm max. Specific weight of bands from 150 gsm min to 200 gsm max. |
| Materials : | |
| Sheet / roll | Woven HDPE black fibres fabric, double-side lamination with LDPE coating, reinforced with six bands of 75 mm width woven black HDPE fibres fabric and coated outside. Pre-punched 8 mm holes on the two side bands at 0.1 m +/-10% intervals, positioned in the centre of the bands (only the reinforcement bands are pre-punched, not the tarpaulin itself). |
| Tensile strength | Min 500 N, 15-25% elongation in warp and weft in plain sheet under ISO 1421-1 |
| UV resistance | After 1500 hours UV under ASTM G53/94 (UVB 313 nm peak) minimum 80% of original value of the actual product and not less than 475 N |
| Reinforcement bands | Min 700 N as per ISO 1421-1, pulling lengthwise in a prepunched 8 mm hole with a hook of 8 mm wire diameter, at 200 mm from the end of the band. UV resistance80% of original value and not less than 665 N. |
| Welding | Only one is allowed, lengthwise. The tarpaulin tensile strength crossways at the place of welding under ISO 1421-1 minimum 50% of original value and not less than 400 N |
| Width and length : | |
|---|---|
| Size / sheet | 4.00 m x 5.00 m +- 1 |
| Size / roll | 4.00 m x 50.00 m +- 1 |
| Materials : | |
| Sheet / roll | 190 gsm ±20 g/m² woven Polyethylene (HDPE) inner black fibers, warp x weft, laminated on both sides with LDPE coating |
| Denier | Min 1000 |
| Tensile strength | Min 600N both directions warp and weft (BS 2576, 50mm grab test or equivalent) |
| Tear strength | Min 100N both directions (BS 4303 wing tear or equivalent) or under ISO 4674 (A2) |
| UV resistance | Max 5% loss of original tensile strength under ISO 1421 after 1500 hours UV under ASTM G53/94 (UVB 313nm peak) |
| Welding | Only 1 is allowed, lengthwise. Min resistance 80% of original tarpaulin tensile strength in the weft under ISO 1421 plus additional procedure |
| Eyelets | Aluminum reinforcement eyelets or equivalent on 4 sheet sides of single sheets at 100cm (±5 cm) Centre to Centre, providing very strong fixation |
